Learning how to use nano ceramic coating properly transforms your vehicle's protection and appearance. Molecular Pro is the perfect high-end all-round nano ceramic to protect your vehicle from UV rays, water, and stains, while providing a deep, glossy finish and making cleaning effortless. One of the best performing nano ceramic coatings available, Molecular Pro delivers outstanding durability and a hydrophobic finish that lasts.
Molecular Pro can be applied to the car body, engine plastics and metal components, headlights, taillights, and wheels. Do not apply to uncoated plastic parts, newly painted surfaces (less than 3 months old), low-quality paint, glass, fabrics, and tires.
Environmental conditions are critical for successful DIY ceramic coating application. Maintain the application environment within the recommended temperature and relative humidity range (+5˚C ~ +30˚C / 41˚F ~ 86˚F / 50% RH) to achieve optimal product performance. Avoid direct sunlight and apply only on cool surfaces to prevent premature curing and uneven results.
After decontamination, polish or compound the surface using the appropriate tools and silicone-free/wax-free cutting compounds according to the condition of the paint. Once polishing is completed, wash the vehicle again and make sure all areas are completely dry before applying the product.
Prepare the surface with the Surface Therapy to remove any remaining contaminants, then dry with a lint-free microfiber cloth.
Wear the supplied nitrile gloves before use. Fit the suede cloth onto the applicator block’s sponge evenly. Shake the bottle gently before application.
Open the lid and pour the required amount of product onto the suede cloth. 5–8 mL is sufficient for 1 m² / 10 ft². Keep the lid closed during use.
Replace or discard the suede after applying to 3–4 panels. Do not apply to areas larger than 1 m² / 10 ft² at a time.
Spread the coating evenly in a criss-cross motion. Once beading occurs (approximately 30 seconds under normal conditions), gently remove excess product using the microfiber cloth in linear strokes.
After wiping, finish buffing each section gently with the microfiber cloth in circular motions. Keep the coated surfaces away from direct sunlight, dust, water, and contaminants for the full 24-hour curing period.
