Molecular Medium-Cut Polish Compound - 500mL

Most paint doesn't need heavy cutting. It needs the middle ground: enough bite to clear swirl marks, wash marring and light scratches, and a finish clean enough that you're not chasing haze afterwards. Molecular Medium-Cut is that polish.

$38.50

A balanced polish that clears swirls and light scratches while finishing cleanly. Step two of the three-stage system, or a one-step on its own.

Key features

  • Clears swirl marks, wash marring and light scratches
  • Cuts well and finishes cleanly, so less work afterwards
  • Step two of the three-stage Molecular polishing system
  • Works on its own as a one-step on paint in good condition
  • 500mL bottle for professional and enthusiast use

Why it works

This is the polish most cars actually need. Use it after Coarse-Cut on badly damaged paint, or on its own as a one-step correction when the paint is in reasonable order. Finish with Fine-Cut when you want maximum gloss before a Molecular coating goes on.

How to use

  1. Wash and decontaminate the paint, then wipe down with Surface Therapy.
  2. Apply a few pea-sized drops to a medium cutting or polishing pad.
  3. Spread over a 50 x 50cm section with the machine off, then work in slow, overlapping passes.
  4. Wipe off the residue with a clean microfibre towel and inspect under good light.
  5. Repeat on stubborn areas, or move to Fine-Cut to refine the gloss.
  6. Test a small area first.

Specifications

  • Size: 500mL
  • Stage: 2 of 3, medium cut
  • Use with: Machine polisher and medium cutting or polishing pad

SAFETY AND STORAGE: Store upright below 30°C, out of direct sunlight, with the cap closed. Keep out of reach of children. Read the label and Safety Data Sheet before use.

Read the guide: what causes swirl marks during washing