Molecular Prestige is a high end silica based nano-ceramic coating designed for car paint, headlights, black plastics, and trims. It provides protection against scratches, bird droppings, acid rain, UV rays, detergents, and a wide range of chemicals. When applied properly, the end result feels like silk and has an enhanced gloss look . For best results, please refer to the user manual for application instructions.
Once cured, the coating becomes extremely difficult to remove from any surface. If the product is applied incorrectly, removal is only possible with a strong cutting compound or by wet sanding using P2000 grit sandpaper. To prevent unwanted results, carefully review the user manual.
Molecular Prestige can be applied to vehicle body paint, hard plastic trims, headlights, taillights, and wheel rims.
Molecular Prestige is formulated for both professionals and end users. Application on a mid-size car generally requires 60–90 minutes. For optimal results, ensure that the application area is within the recommended temperature and humidity range (+5 °C ~ +30 °C / 41 °F ~ 86 °F / 50% RH). If the ambient temperature or humidity exceeds these limits, the coating may cure faster than expected. Avoid working under direct sunlight and only apply on cool surfaces.
Thoroughly wash the vehicle. If necessary, use a clay bar. After decontamination, polish or compound the surface using proper equipment and silicone/wax-free cutting compounds suited to the paint condition. Once polishing is complete, rewash and dry all treated areas completely. Use compressed air to remove trapped water from trims and panel gaps.
Clean the surface with the Surface Therapy to maximize nano-coating adhesion. Ensure the surface is free of contaminants and dry it with a lint-free microfiber cloth. Do not attempt to coat an area larger than 1 m² at a time.
Before starting, put on the provided nitrile gloves. Place a suede cloth over the applicator block’s sponge and replace it every 3–4 panels. Shake the bottle gently before use. Open the cap and apply the required amount onto the suede cloth.
4–5 mL is sufficient for 1 m². Keep the bottle tightly closed during use. Spread the coating evenly in a crisscross motion. Once beading begins (about 30 seconds under normal conditions), lightly remove excess product with the light gray microfiber cloth using linear strokes.
To maximize efficiency, fold the cloth into four sections and avoid reusing the same side. If the first wipe is delayed, the product may harden, making removal difficult or impossible. In such cases, the surface must be polished or sanded and then recoated. After the first wipe, complete the buffing step with the dark gray microfiber cloth in gentle circular motions.
Keep coated areas away from sunlight, contaminants, and water for 24 hours. Allow 48 hours for the nano coating to fully cure and achieve chemical and abrasion resistance before washing with detergents.
CONSUMPTION
A single layer ensures durability. Approximate consumption amounts are as follows:
STORAGE
The product has a 24-month shelf life from production when stored unopened in its original container at -3 °C to +30 °C / 26.6 °F to 86 °F. Once opened, it is recommended to use within 1 week.
