Molecular Coarse-Cut Polish Compound - 500mL

Key features

• Maximum cut for sanding marks, deep swirls and heavy oxidation
• Step one of the three-stage Molecular polishing system
• Designed for machine polishing with a cutting pad
• Levels defects quickly, so less time on the heavy work
• 500mL bottle for professional and enthusiast use

Why it works

The Molecular system runs in three stages: Coarse-Cut to remove the damage, Medium-Cut to refine, Fine-Cut to finish. Starting with the right cut matters. Go too light and you chase the defect for hours; go heavy and refine properly afterwards and the paint comes back faster, with more clear coat left on the car.

How to use

1. Wash and decontaminate the paint, then wipe down with Surface Therapy.
2. Mask off trim and edges.
3. Apply a few pea-sized drops to a cutting pad and spread over a 50 x 50cm section with the machine off.
4. Work the section in slow, overlapping passes until the polish goes clear.
5. Wipe off the residue with a clean microfibre towel and inspect under good light.
6. Follow with Medium-Cut or Fine-Cut to refine the finish.
7. Test a small area first and check your paint depth before heavy correction.

Specifications

• Size: 500mL
• Stage: 1 of 3, heavy cut
• Use with: Machine polisher and cutting pad

SAFETY AND STORAGE: Store upright below 30°C, out of direct sunlight, with the cap closed. Keep out of reach of children. Read the label and Safety Data Sheet before use.

Read the guide: what causes swirl marks during washing